力士乐伺服修理TDM系列驱动器显示f226报警说明

F226:Description:说明：

The level of the DC bus voltage will be monitored by the drive controller. If

the DC bus voltage falls below a minimal threshold, the drive

independently shuts down according to the set error reaction.

直流母线电压的水平将由驱动控制器监控。如果直流母线电压低于最小阈值根据设定的错误反应独立关闭。

Cause:原因：

1. The power source has been interrupted without first switching off

the drive enable (RF).

电源在未首先关闭的情况下中断驱动使能（RF）。

2. Disturbance in the power supply

电源干扰。

Remedy:排查思路：

For 1 Check the logic regarding the activation of the drive within

the connected control.

检查内部驱动器激活的逻辑连接的控件。

For 2 Check the power supply.

检查电源。

The error can be cleared by removing the control enable signal.

可以通过移除控制启用信号来清除错误。